Shopping security
Shopping for a serious 2 Post Lift can feel risky when you run full-size trucks and service bodies all day. You need real 18,000 lb capacity, not marketing fluff, plus stable picks and enough rise to work comfortably under tall vehicles. The AMGO OH-18 is built for exactly that, with dual direct-drive cylinders, four heavy-duty two-stage arms, and a clear-floor design that keeps your bay open. Max lifting height reaches 74 7/8 to 76 1/4 inches without adapters and up to 83 7/8 to 85 1/4 inches with adapters, so techs stand taller and wrench easier. If you’ve been burned by slow lifts or wobbly arms, this 2 Post Lift fixes those pain points with smooth hydraulics and rock-solid carriages. Above 16K capacity, the lift market splits cleanly between hobbyist-grade equipment that overstates structural ratings and full commercial-grade lifts that come with full commercial pricing. 18K is firmly in the commercial tier, where structural verification matters more than the headline capacity number.
In busy shops, uptime matters more than anything. The OH-18 uses aero-sync equalization cables to keep vehicles level as they rise, which means fewer mid-lift adjustments and faster cycle times. Automatic arm restraints lock in as you lift, while a single-point manual lock release lets you drop both columns from one side to speed workflow. Overhead heights are adjustable at 174, 186, or 198 inches, so you can fit more bays without custom steel. Drive-thru clearance is a generous 110 7/16 inches, and width between columns is 123 1/2 inches for easier spotting on longer wheelbases. Three column-height settings (174", 186", 198") accommodate the bay ceiling heights commercial shops actually have. Heavy-duty 2.0 HP 220V power unit and reinforced structural design rated for daily fleet commercial cycling.
This is a true commercial vehicle lift designed for fleets, medium-duty trucks, and upfit rigs where 12k or 15k just won’t cut it. Self-lubricating UHMW sliders reduce maintenance, and extra-long carriages add stiffness under heavy loads. The power unit runs on 220V single phase and lifts to full height in about 84 seconds, balancing speed with control. You also get heavy-duty rubber pads and saddle adapters, plus 3 and 6 inch stackable extensions in the box. If you’re comparing amgo 2 post lifts or shopping for an 18000 lb 2 post lift, the OH-18 checks every box for capacity, safety, and everyday shop efficiency. For shops handling fleet trucks, ambulances, work vans, and other heavy commercial vehicles that exceed 16K capacity, the OH-18 delivers true commercial-grade structural rating without the major-brand commercial premium.
If this lift isn’t ideal, browse our full lineup of 2-post lifts.

• Real 18,000 lb capacity for commercial work: This lift is purpose-built for trucks, service bodies, and upfit rigs that outclass standard bays. The OH-18 handles heavy frames confidently thanks to extra-long carriages and stout columns. If you routinely load vehicles with tool bodies or racks, this capacity gives you a safer, more stable pick every time.
• Dual direct-drive hydraulics with smooth, level rise: Direct-drive cylinders eliminate chains and reduce moving parts, which cuts maintenance and improves feel. Aero-sync equalization cables hold the vehicle level through the entire travel, so techs aren’t chasing uneven arms mid-lift. You get consistent starts and stops that protect both the vehicle and your team.
• Four heavy-duty two-stage arms with automatic restraint: The arm design reaches a wide range of pick points on longer wheelbases without sacrificing stability. Automatic arm restraints engage as you lift, locking position and increasing safety under load. With 3 and 6 inch stackable adapters in the box, you can dial in ideal contact on different chassis heights.
• Three adjustable overhead heights to fit more shops: Choose 174, 186, or 198 inches to match your ceiling height without custom mods. The overhead shutoff protects tall roofs and equipment if a lift keeps rising. This flexibility helps multi-bay shops standardize lifts across uneven ceilings while keeping workflow consistent.

Minimum Garage Requirements
✔ Ceiling Height: At least 180" (15'0") recommended ✔ Footprint: 110" drive-thru x 150" overall (9'2" x 12'6") ✔ Concrete Thickness: Minimum 4" (101.6 mm) ✔ Concrete Strength: Minimum 3,000 PSI compressive ✔ Electrical: 2.0 HP, 220V, 60 Hz, 1-Phase ✔ Overall Lift Height: 174" (14'6") (measure before ordering)
✔ Ceiling Height: At least 180" (15'0") recommended
✔ Footprint: 110" drive-thru x 150" overall (9'2" x 12'6")
✔ Concrete Thickness: Minimum 4" (101.6 mm)
✔ Concrete Strength: Minimum 3,000 PSI compressive
✔ Electrical: 2.0 HP, 220V, 60 Hz, 1-Phase
✔ Overall Lift Height: 174" (14'6") (measure before ordering)
*Concrete must meet the manufacturer's minimum requirements as specified above. Installing this lift on inadequate concrete may result in serious injury or death. It is the customer's responsibility to verify concrete thickness and strength prior to purchase and installation. Stacking taller vehicles vertically may require additional ceiling height. Measure your specific vehicles before ordering. Note: 2-post overhead lifts inherently require tall ceilings. Verify your overhead clearance before ordering.
AMGO OH-18 18,000 lb 2-Post Car Lift Specifications |
|
| Manufacturer | AMGO |
| Lifting Capacity | 18,000 lb |
| Power Unit | 2.0 HP, 220V, 60 Hz, 1-Phase |
| Recommended Circuit | Dedicated 20A, 220V single phase |
| Lift Time | ~84 s |
| Minimum Pad Height | 6 7/8 in |
| Max Lifting Height - No Adapters | 74 7/8 to 76 1/4 in |
| Max Lifting Height - With Adapters | 83 7/8 to 85 1/4 in |
| Max Lock Height - No Adapters | 72 15/16 to 74 1/4 in |
| Max Lock Height - With Adapters | 81 15/16 to 83 1/4 in |
| Overall Height Settings | 174 in, 186 in, 198 in |
| Overall Width | 150 3/4 in |
| Width Between Columns | 123 1/2 in |
| Drive-Thru Clearance | 110 7/16 in |
| Design | Clear-floor with overhead shutoff |
| Cylinders | Dual direct-drive hydraulic cylinders |
| Equalization | Aero-sync cables |
| Arms | 4 heavy-duty two-stage arms with automatic restraints |
| Carriages | Extra-long, heavy-duty construction |
| Sliders/Bushings | Self-lubricating UHMW polyethylene sliders |
| Safety Locks | Single-point manual safety lock release |
| Overhead Shutoff | Included, protects high roofs |
| Included Pads | Heavy-duty single-screw rubber pads and saddle adapters |
| Included Adapters | 3 in and 6 in stackable extensions |
| Included Accessories | Detachable toe guards, tool trays |
| Electrical Requirements | 220V single phase, dedicated circuit |
| Floor Requirements | Level concrete slab, typical 4 to 6 in thick at 3,000+ PSI minimum; follow AMGO manual and local code |
| Gross Weight | 2,787 lb |
| Warranty | Steel Structure (columns, carriages, arms, beams, ramps, etc.): 5 Years Hydraulic Parts (cylinders, seals, hoses, fittings): 3 Years Other Parts (excl. Consumables), electrical, power units: 2 Years |
Ready to upgrade your garage? Talk to a Lift Specialist or explore more options.
Ships within 48 hours · Estimated delivery Jun 26 - Jul 1
US$40
Get nowSign up to your membership to get coupons up to
15%
Get nowOpportunity to enjoy order discount up to 15% off
Top-Converting Item to Boost Your Average Order